WANHAO Duplicator 4x Bedienungsanleitung PDF herunterladen (Seite 43)

LCD PANEL | INFO AND SETTINGS MENU

-------------------------------------------------------------------------------------------------------------------------------------------

Bot Statistics:

Displays the estimated total hours and minutes of building in the

lifetime of your duplicator 4 and the duration in hours and minutes of the last

build.

General Settings:

Optional settings and information

1,Sound:

Turns the duplicator 4/4X’s indicator sounds on or off.

2,Heat hold:

Specifies a time period for your extruder to continue heating when

a 3D print is canceled

Preheat Settings:

Allows you to change the temperature setting for the extruder.

Before you print,you can set the temperature when you generate G code.

MAINTENANCE

-------------------------------------------------------------------------------------------------------------------------------------------

Lubricating the Threaded Rod and the X-Axis Idler Pulley

1. Find the tube of PTFE-based grease,

included with your wanhao 3d printer.

2. Grasp both sides of the build platform

and push it gently to the bottom of

duplicator 4/4X，Use a clean, lint-free rag

[or your finger],to spread the PTFE-based

grease onto the top section of the

threaded rod.Grasp both sides of the build

platform and move it to the top of the

duplicator 4/4X，Use a clean, lint-free rag

[or your finger] to spread the PTFE-based

grease onto the bottom section of the

threaded rod. Make sure you get the

grease inside of the threads themselves

3. Locate the X-axis idler pulley. If you are,facing the front of duplicator 4/4X, the

idler pulley is at the top left side. The idler pulley is one of the pulleys that allow

the rubber belt to move the extruder from left to right, or along the X-axis.The

pulley at the other side of the gantry is called the timing pulley and does not

require lubrication.

E Troubleshooting , Diagnostics , and Maintenance

------------------------------------------------------------------------------------------------------------------------------------------

--------

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 72 73

Keine Kommentare

WANHAO Duplicator 4x Bedienungsanleitung Seite 43